产品 / 胎压监测

TPMS 平台集成 —— 平台收到什么,以及它不需要什么

大多数 TPMS 集成卡在同一个点:平台方既要收数据,又要额外接一个私有解码器。这页讲的是不碰你后端就能定下来的部分——数据包、格式、我们转发什么。

两种集成方式

透传:把传感器的 8 字节原始包原样转发,平台自己解码(参数见上);解析:直接给结构化 CAN 帧 (压力/温度/状态/轮位已分开),周期 500 ms。前者适合已有 TPMS 解码器的平台,后者适合只要数值的平台。

平台

  • Wialon / Navixy / flespi / ThingsBoard / Traccar:都在我们的接入清单上,正在逐个走流程(in the process of integrating)。
  • 已经能做的:不管平台目录里有没有我们,数据都能按上面的格式先接进去。
  • 还不能做的:指着平台目录里一条带我们名字的条目——条目不存在之前我们不会说"支持"。

我们不做什么

平台是你的。我们只给传感器、接收器和数据契约;不托管你的车队逻辑,不变成你的记录系统,也不要你的客户数据。

常见问题

Can we receive raw sensor packets instead of decoded values?
Yes. Transparent mode forwards the 8-byte packet over CAN or RS232, so your decoder applies the documented parameters (poly 0x07, init 0xFF, no reflection, MSB-first).
Do you require an NDA before sharing the data format?
No NDA is required for the CAN or serial data format; the RF parameters are a separate matter.
Is a device entry already published in these platforms?
Not yet. We are in the process of integrating with each platform listed on this page, and we will say so plainly until an entry exists.

把应用场景告诉我们

把车型、轮位数量、数据最后要到哪里发给我们。我们书面回复。