Products / TPMS

Semi Trailer TPMS - the Display Recognises Which Trailer Is Hooked

Drop-and-hook only works if the tyre system follows the trailer, not the tractor. This is a solution page for operators who swap trailers several times a day and do not want a re-pairing step in the yard.

Direct answers

  • One receiver supports up to 256 wheel positions per unit, and up to 65,535 trailers can be addressed by short ID.
  • Trailer identification is automatic: the display polls for trailers in range and lists the IDs present, 10 seconds per cycle.
  • The driver picks the trailer on the display, or the dispatcher assigns it from the platform - no re-pairing when swapping trailers.
  • Radio: 433.42 MHz for the trailer link and 433.92 MHz for wheel sensors - two separate frequencies, so sensor traffic and trailer polling do not collide.
  • Trailer node is powered from the trailer supply, so there is no battery to service on the trailer side.
  • There is no SIM card in the trailer node.

1. What "drop and hook" means for a TPMS

In a drop-and-hook operation the tractor is the constant and the trailer is the variable. A tyre system that lives on the tractor only knows the wheels it was paired with, so every swap either loses the new trailer's readings or forces someone to pair sensors again in the yard. The fix is not a better sensor; it is putting the identity of the trailer into the system, so the display can say "this is trailer X, these are its wheels".

2. How the display finds the trailer (short ID, polling, 10 s cycle)

Each trailer carries a short ID. The display polls for trailers in range and lists the IDs it hears, one pass every 10 seconds. When a trailer is hooked up, its ID appears in that list without the driver doing anything to the sensors. The driver selects the trailer on the display, or the dispatcher assigns it from the platform, and the wheel positions of that trailer become the active set.

3. How many trailers can one tractor remember (65,535 addressable)

The short-ID space addresses up to 65,535 trailers; one receiver covers up to 256 wheel positions per unit, which is more than any single trailer uses. What matters in practice is that a tractor working a pool of trailers keeps the history of each one instead of overwriting a single slot.

4. What happens when a driver hooks a different trailer

Two things stop being true at the same moment: the old wheel set stops being "the trailer" and the new one starts. Because the trailer identity travels with the trailer, the display switches the active set to the new ID, and the readings, alarms and history follow that ID rather than the tractor. Nobody re-pairs sensors in the yard, and the dispatcher does not have to trust a driver's verbal report of which trailer is behind the cab.

5. What the system does not do

It measures tyre pressure and temperature and it identifies the trailer. It does not read the trailer's own electronic braking system, it does not report the state of that system, and it does not replace any function of the towing vehicle. If you need those signals, they stay where they are - on the vehicle's own network.

Multi-trailer TPMS: one tractor, many trailers

Multi-trailer TPMS: up to 65,535 trailers by short ID, 256 wheel positions per receiver, 10 s polling.

A multi-trailer operation is not a fleet of tractors with tyres - it is a pool of trailers that get hooked in a different order every day. The short-ID space addresses up to 65,535 trailers and the display polls the trailers in range every 10 seconds, so the active wheel set is whichever trailer is actually behind the cab. One receiver covers up to 256 wheel positions.

Drop and hook TPMS: what has to be automatic

Drop-and-hook TPMS: trailer identified automatically in 10 s, no re-pairing, 433.42 MHz trailer link.

In drop and hook the only manual step that survives is the driver selecting the trailer; pairing must not be part of it. Our trailer link runs on 433.42 MHz while the wheel sensors use 433.92 MHz, so polling and sensor traffic do not collide, and the trailer is identified by its short ID within one 10 second cycle. The dispatcher can also assign the trailer from the platform instead of the cab.

Trailer dolly TPMS: the dolly is a trailer too

Trailer dolly TPMS: the dolly carries its own short ID, so it is recognised like any other trailer.

A dolly converter adds a fifth wheel and its own tyres into the combination, and on long combination work it is the part nobody looks at. Because identification travels with the trailer rather than the tractor, a dolly that carries a short ID is recognised the same way a semi-trailer is - the display lists it and the wheel set follows. The wheel positions on the dolly are addressed with the rest of the combination, up to 256 per receiver.

B-train TPMS: two trailers, one display

B-train TPMS: both trailers addressed by short ID, up to 256 wheel positions per receiver.

A B-train is two trailers connected by a fifth wheel, which means two wheel sets that belong to different trailers but are read by one tractor. With short-ID identification each trailer keeps its own identity, so swapping the rear trailer does not disturb the front one. Pressure range is 0-1400 kPa gauge at ±7 kPa, sensors are IP68, and the data goes to the cab display or out over CAN.

Trailer TPMS with automatic recognition: how we test it

Trailer recognition test: hook a different trailer, the active wheel set changes within one 10 s cycle.

The acceptance test for automatic recognition is simple and does not need a lab: hook trailer A, read its wheel set, unhook it, hook trailer B, and confirm the display lists B and reads B's wheels within one 10 second polling cycle without touching a sensor. If the system needs a pairing step between A and B, it is not automatic recognition - it is a pairing step with a longer name.

What to send us

For a drop-and-hook fleet the useful inputs are: how many trailers are in the pool, how many wheel positions a typical trailer has, the nominal tyre pressure, and where the display is mounted in the cab. With those four we can say whether one receiver covers the tractor side or a repeater is needed for the long combinations.

FAQ

Do sensors have to be re-paired when a trailer is swapped?
No. The trailer carries a short ID; the display polls for trailers in range every 10 seconds and lists the IDs present, so the active wheel set follows the trailer that is hooked.
How many trailer IDs can the system address?
Up to 65,535 trailers by short ID, and up to 256 wheel positions per receiver.
Does the trailer node need a SIM card?
No SIM card in the trailer node; the trailer link is 433.42 MHz and the wheel sensors are 433.92 MHz.

Tell us the application

Send the vehicle, wheel count and where the data must end up. We answer in writing.

Combination-specific pages: modular trailers · trailer dollies · drop-and-hook operations

Multiple trailers behind one tractor, including B-train combinations: B-train and multi-trailer TPMS.