Products / TPMS
TPMS for Drop-and-Hook Operations
Drop-and-hook: the display recognises which trailer is hooked, polls every 10 seconds, and up to 65,535 trailers are addressable by short ID.
Drop-and-hook: the display recognises which trailer is hooked, polls every 10 seconds, and up to 65,535 trailers are addressable by short ID.
In a drop-and-hook yard the tractor changes trailer several times a day, and a TPMS that needs re-pairing each time is worse than none.
Our display lists the trailers it can hear and the driver picks the one attached, so the swap takes seconds.
The dispatcher can also assign the trailer from the platform instead of the driver doing it.
We do not read the fifth-wheel or coupling sensor, and we do not confirm that a trailer is physically attached - we report which trailers are in radio range.
What you get
- 0-1400 kPa gauge (100-1500 kPa absolute), ±7 kPa
- IP68 on sensor, receiver and repeater
- Up to 256 wheel positions per receiver
- 433.92 MHz, CAN 2.0B 250 kbps default, 500 ms period
All applications · Semi trailer TPMS
FAQ
- Does the driver have to do anything at the swap?
- Only pick the trailer from the list the display shows; there is no re-pairing.
- How long does recognition take?
- One polling cycle, 10 seconds.
- Can the platform assign the trailer instead?
- Yes - the dispatcher can assign it from the platform rather than from the cab.
Tell us the application
Send the vehicle, wheel count and where the data must end up. We answer in writing.