Products / TPMS

TPMS for Modular Trailers and Heavy Haulage

Modular trailers: up to 65,535 trailers addressable by short ID, 10 second polling cycle, up to 256 wheel positions per receiver.

Modular trailers: up to 65,535 trailers addressable by short ID, 10 second polling cycle, up to 256 wheel positions per receiver.

A modular trailer is reconfigured for each load, so a fixed sensor list is useless.

The display polls for trailers in range and lists the short IDs present, and the driver picks the combination being used today.

Trailer polling runs on 433.42 MHz and wheel sensors on 433.92 MHz, so the two do not collide.

We do not read the trailer's own EBS or brake status - we report tyre pressure and temperature.

What you get

  • 0-1400 kPa gauge (100-1500 kPa absolute), ±7 kPa
  • IP68 on sensor, receiver and repeater
  • Up to 256 wheel positions per receiver
  • 433.92 MHz, CAN 2.0B 250 kbps default, 500 ms period

All applications · Semi trailer TPMS

FAQ

How many trailers can one tractor remember?
Up to 65,535 trailers are addressable by short ID; the display lists the IDs currently in range.
Does the driver have to re-pair sensors when the trailer changes?
No. Polling every 10 seconds finds the trailers in range; the driver picks the one attached.
Is the trailer node powered from the trailer?
Yes - the trailer node takes power from the trailer supply and carries no SIM card.

Tell us the application

Send the vehicle, wheel count and where the data must end up. We answer in writing.