Материалы / Sourcing

OEM TPMS или послепродажный TPMS

· 7 мин чтения

Two purchases that look like one

An aftermarket TPMS and an OEM TPMS both end up as a sensor on a rim and a receiver talking to a

controller. At the quotation stage the difference can be a few percent. After the first order the

difference is structural: one route buys you a finished product, the other buys you the right to make

it yours.

Three words get used loosely in this trade, so start by pinning them down:

TermWhat it actually meansWho decides the spec
AftermarketYou buy a finished unit and resell it under whatever label it already carriesThe supplier, once, for everybody
OEMThe factory builds to your specification and marks it with your brand and part numberYou, per order, inside the factory's design
ODMThe factory's own design, delivered under your brandThe factory - you brand it

Most "OEM" offers in this industry are ODM with a logo. That is not a trick, but it changes what you

own, so it is worth asking which of the three you are being offered.

1. Who owns the certification

This is the item that decides whether the route is even open.

Our answer: CE is in progress and not held. Component-level RoHS/REACH declarations can be

requested from our suppliers. There is no FCC ID. If your product must carry a certificate number at

the purchase-order stage, an OEM programme starting today does not deliver it - the certificate

belongs to the product and to the manufacturer named on it, and it takes the radio certification cycle

that CE requires.

What you should ask either supplier: whose name is on the certificate? A certificate issued to

a chip or module vendor does not cover the finished sensor, and "we can share our supplier's

certificate" is a different sentence from "we hold a certificate".

2. Who owns the firmware and the software

Aftermarket route: the app, the gateway payload and the wheel map are whatever the supplier already

made. You can choose between the options on his price list, not between features that do not exist.

OEM route: the marking, packaging and part number are yours, and the firmware settings that the

factory exposes - the wheel map, the CAN frame set, the report cycle - are configured for your order.

Two limits stay in place: **the radio module and the pressure range do not change inside an OEM

programme (that is a new product, with its own design and its own test cycle), and the platform

is a separate item**. A dashboard or a console is quoted against a requirement list, and a

multi-tenant console is not the same job as a single site view. We will provide the platform, or just

the API and the data push, but the software is charged separately from the hardware.

3. Who carries the after-sales work

Aftermarket: the supplier's standard warranty terms, and you are the one standing between the end

customer and a product you did not design.

OEM: yours, and the factory becomes the manufacturer behind your brand. This is also where the

uncomfortable questions live: what happens to a batch with a wrong band length, who pays the freight,

who owns the tooling. Put the answers in the agreement, not in an email thread.

4. What can still change after the first order

ItemAftermarketOEM (our scope)
Label and part numberNoYes, laser engraved - one set is enough to start
PackagingNoYes, to your artwork
Wheel map / CAN frame setNoYes, configured per order
Pressure rangeNoNo - the range is the radio's design
Radio (433.92 MHz vs 2.4 GHz BLE)FixedFixed - two different product lines
Platform / consoleUse the supplier'sProvided or API-only, quoted separately

The numbers behind those rows are the same on both routes, because it is the same hardware:

433.92 MHz sensors at 0-1400 kPa gauge (100-1500 kPa absolute) with ±7 kPa and IP68, up to 256 wheel

positions per receiver, CAN 2.0B at 250 kbps default with a 500 ms period, and RS232 / RS485 (Modbus

RTU slave) / UART as the serial option. Light-vehicle BLE parts are a different line: 0-500 kPa gauge

(0-600 kPa absolute), ±2 kPa, IP67, CR1632 replaceable, about 1.5 years, no receiver at all.

5. When the aftermarket route is the right answer

Say this out loud before selling an OEM programme: aftermarket is better when you are testing

whether the market exists, when the volume is small, when the customer needs delivery this month, or

when you have no intention of changing the software. Buying a finished unit and reselling it is a

perfectly good business; the mistake is paying OEM effort for a trial order, or signing an OEM

programme and expecting aftermarket delivery times.

6. When OEM is worth the work

It is worth it when you already have a brand and a channel, when the machine needs a specific wheel

map or a specific frame set, when your customer will ask "whose product is this", or when you intend

to build a service business on top of the data. That last one is the real reason to go OEM: the

installed base becomes yours, and the second order is cheaper than the first.

Limitation

This comparison comes from the manufacturer's side, so take the limits seriously. It is **not

suitable for you if you need a certified product now - CE is in progress, not held. It is not

suitable if your business depends on changing the radio or the pressure range** inside a modest order:

that is a new product, not a branding exercise. And it is **not suitable for a liquid-filled tyre

fitted with an internal sensor** - the sensor is submerged for part of each rotation, so the external

valve-stem version is the one to specify.

What to send us

Your brand name, your part-number scheme, the machine and tyre it goes on, the wheel count, the

interface, and what the data has to feed. We will come back with two things: which of your requests

are inside a normal OEM order, and which ones are a new product. That split is the whole decision.

Related reading: OEM vs ODM tells you which of the two private-label models

you are actually being offered; the 12-question specification checklist

covers the technical side; and the OEM/ODM programme page lists what stays unchanged.

If you want the split for your own product, send us the brand and part-number plan.

← Все статьи