Products / TPMS

A custom TPMS system: what changes, what does not, and what to send us

Most "custom TPMS" conversations fail for the same reason: the buyer asks what can be changed, the supplier answers "everything", and six weeks later nothing fits. This page splits the answer in two columns - what we change on a normal project, and what is fixed because it is the platform.

What we change (normal projects)

ItemWhat a custom project can do
Radio and protocol 433.92 MHz industrial or BLE, depending on the line. Receiver interface is one of CAN 2.0B / RS485 Modbus RTU / RS232 / PROFINET gateway - one per unit, chosen at order. Message layout, DBC/parameter set and data period are aligned to your controller.
Pressure range Standard is 0-1400 kPa gauge (100-1500 kPa absolute). A high-pressure variant is quoted for tyres above that; we confirm the sidewall pressure before quoting rather than promise the standard part covers it.
Wheel count and layout Up to 256 wheel positions per receiver, with the repeater count and positions calculated from your axle drawing. This is the part most projects get wrong, so it is a deliverable, not an afterthought.
Sensor body and mounting Internal band, built-in valve or external valve-stem, band length cut to your rim circumference. Your part number can be laser-engraved on the body.
Presentation If we supply the cab display, the interface language and the screens carry your brand. Packing and labels are made to your artwork.
Enclosure Where an existing enclosure does not fit, we design a housing for the project - that is a development item with its own quote, not something included in the sensor price.

What does not change (and why)

  • The radio band and modulation. 433.92 MHz or BLE are the platforms we build; a different band is a new product, not a customisation.
  • The internal sensor battery is sealed. When the cell is exhausted the sensor is replaced; we do not offer a field-replaceable internal sensor. (Our external BLE sensor uses a replaceable CR1632 - that is a different part.)
  • No ATEX / IECEx version. If the machine operates in a classified zone we are the wrong supplier, and we say so at the first email.
  • Certification cannot be created by customising. CE-RED is in progress for the platform; a certificate we do not hold is not something a project can add.
  • Modbus is slave only. Your PLC or controller polls us; we do not act as a master and we do not poll other devices on your bus.

How a custom project is quoted

  1. Send the machine and the interface. Machine type, wheel/axle layout, the controller it talks to, and the pressure range on the tyre sidewall.
  2. We confirm the platform fit. Which of our existing boards and sensors fits, and what is genuinely new. If nothing has to be developed, we say so - the project is then a configuration, not an NRE item.
  3. Drawings and a configuration list first. Mounting position, repeater positions, wheel-position table and message layout, so the proposal is a picture of the installation rather than a datasheet.
  4. Sample, then batch. One set is enough for a sample; branding is engraved on the sample and photographed for your approval before production.

Where this fits with the rest of the range

If you are buying a standard system, the pages to read are our product range and the OEM/ODM page. If the question is whether a system can be built for a machine nobody has instrumented yet, this is the page. For the honest status of certifications and testing, see certifications and test status; the full list of questions a spec should answer is in the 12-question checklist.

Machine-specific examples: 160-wheel beam carrier, reach stacker, SPMT.

FAQ

Can you build a TPMS for a machine that has never been instrumented?
Usually yes, if the platform fits: we confirm the wheel layout, the steel around the signal path and the controller interface first, then propose the sensor type and the repeater positions from your drawing.
What is the minimum order for a custom system?
One set is enough for a sample. Branding is engraved on the sample and photographed for approval before production.
Do you charge for development?
Only when something genuinely has to be developed - a new enclosure, a new firmware behaviour beyond message mapping. When an existing board and sensor fit, the project is a configuration and there is no NRE item.

Tell us the application

Send the vehicle, wheel count and where the data must end up. We answer in writing.