Products / TPMS
TPMS for XCMG port machinery
GZVIA supplies tyre-pressure hardware to XCMG port machinery under the builder's own brand. This page explains what that supply covers, which machines it goes on, and what we do not do.
Short answer: we build the sensors, receivers and repeaters; XCMG port machinery sells them under its own name on its RTG, reach stacker and empty-container-handler lines. Field trials ran on tens of machines and the changeover is in progress.
What "supplied under their brand" means
The hardware is ours and the product identity is theirs. That means:
- the label, part number, packaging and manual are XCMG's, not GZVIA's;
- the protocol map, connector and mounting are agreed with their engineering team;
- we do not publish their unit volumes, prices or contract terms — that is their commercial information, not ours to publish.
Which machines this covers
- RTG / RMG cranes — long radio path from the wheels to the cab, so the repeater plan matters more than the sensor count.
- Reach stackers — compact layout, typically one receiver.
- Empty container handlers — short wheelbase, same receiver hardware.
What the system gives the machine
- 0-1400 kPa gauge (100-1500 kPa absolute), ±7 kPa
- pressure and temperature per wheel position, 433.92 MHz, 500 ms period
- CAN 2.0B at 250 kbps by default (11-bit or 29-bit frames, one or the other per unit)
- up to 256 wheel positions per receiver (a specification, not a claim about any one machine)
- IP68 on sensor, receiver and repeater; 9-30V supply
What we do not do
We do not read the machine's own load-moment, spreader or drive system, and we do not put our brand next to theirs on the machine. If you need pressure and temperature inside the machine controller, that is exactly the scope; anything beyond it belongs to the machine builder.
If you are a port equipment builder
The same arrangement is available to other builders: your label, your part number, your packaging, our hardware and protocol documentation. Send the machine type, the axle layout and the controller you want the data in, and we will size the receivers and repeaters from that.
FAQ
- Are GZVIA sensors fitted on XCMG port machinery?
- Yes — we supply XCMG port machinery under their own brand. Field trials covered tens of machines and the changeover is in progress. The product carries their label, not ours.
- Can you tell us how many machines XCMG has taken?
- No. Unit volumes and contract terms are the customer's commercial information. What we can talk about is the technical scope and the installation experience.
- Is this the same hardware you sell under GZVIA?
- Yes — same sensor and receiver platform, with the label, part number, connector and protocol map agreed for the builder.
Tell us the application
Send the vehicle, wheel count and where the data must end up. We answer in writing.