Products / TPMS
Straddle carrier TPMS: the wheel is under the load, not beside it
A straddle carrier carries the container above the wheels and drives over it - so the tyre is under the load and behind steel on every side. That single difference decides the sensor position, the repeater layout and how much of the machine the receiver can actually hear.
FAQ
- Why is a straddle carrier harder for TPMS than a reach stacker?
- Because the tyre sits inside the machine's steel footprint, under the load and between the legs. The signal has to leave a steel box, and the layout usually needs a repeater position planned from the drawing.
- Internal or external sensors on a straddle carrier?
- Internal. External hardware is inside the load envelope on this machine and does not survive terminal duty.
- Can the data go into our terminal system?
- Yes: CAN 2.0B (11/29-bit), RS485 with Modbus RTU (slave only), RS232, or PROFINET through a gateway. The message layout is documented.
Tell us the application
Send the vehicle, wheel count and where the data must end up. We answer in writing.