Products / TPMS

TPMS for Terminal Tractors

433.92 MHz sensors, no licence required in most markets, 9-30V supply, CAN or RS232 output, IP68.

A terminal tractor spends its life at low speed with a heavy trailer and a tight turning circle, which is exactly the duty cycle where a slow leak becomes a destroyed tyre before anyone notices.

The receiver runs from the 12V or 24V vehicle supply and needs one CAN tap or one serial port. If your yard already has a telematics gateway, the receiver can forward raw 8-byte sensor packets to it instead of decoding them itself.

One boundary worth stating: we do not integrate with your terminal operating system. We give you pressure and temperature on CAN or serial, and your TOS or telematics layer does the rest.

What you get

  • 433.92 MHz, licence-free in most markets
  • 9-30V supply
  • CAN 2.0B or RS232 or RS485, one per unit
  • IP68 on sensor and receiver

TR-100R receiver specifications · CAN bus TPMS overview · Tell us how many tractors and whether you want CAN or serial

FAQ

What supply voltage does the receiver need?
9-30V, so it runs from either a 12V or a 24V vehicle supply.
Can it forward raw packets to our telematics gateway?
Yes: the 8-byte sensor packet can be forwarded instead of decoded, so your gateway applies its own mapping.
Does it integrate with our terminal operating system?
Not directly - we deliver pressure and temperature on CAN or serial, and the TOS or telematics layer does the rest.

Tell us the application

Send the vehicle, wheel count and where the data must end up. We answer in writing.