Products / TPMS
TPMS for Straddle Carriers
Up to 256 wheel positions per receiver, 0-1400 kPa gauge, ±7 kPa, IP68, CAN 2.0B output.
A straddle carrier has more wheels than a reach stacker and the cab is high and separate from the bogies. That is the case where repeater count actually matters, and we size it from the axle drawing rather than from a wheel count formula.
Typical layout is two receivers and one to three repeaters depending on how much steel sits between the cab and the furthest bogie.
One boundary worth stating: the repeater count is a recommendation from the axle drawing, not something you should fix before we see the drawing.
Straddle carrier tyres: what to check before the shift
Straddle carrier tyres: 0–1400 kPa gauge at ±7 kPa, IP68 at the wheel, 500 ms data period.
A straddle carrier tyre does not fail suddenly; it loses a little pressure over a shift and then the machine starts running one corner low, which is hard to see from the cab. Checking pressure at the wheel with IP68 sensors at a 500 ms period turns that into a number on the screen rather than a walk-around that nobody does on a busy quay.
What you get
- Up to 256 wheel positions per receiver
- 0-1400 kPa gauge, ±7 kPa
- IP68 on sensor, receiver and repeater
- CAN 2.0B, 250 kbps default
TR-100R receiver specifications · Port machinery TPMS overview · Send us the axle drawing
FAQ
- How many repeaters does a straddle carrier need?
- Usually one to three, depending on the steel between the cab and the furthest bogie - we size it from the axle drawing.
- How many wheel positions does one receiver cover?
- Up to 256; a straddle carrier typically needs two receivers for its bogie count.
- Is the receiver IP-rated too?
- Yes - sensor, receiver and repeater are IP68 on the 433.92 MHz line.
Tell us the application
Send the vehicle, wheel count and where the data must end up. We answer in writing.