Products / TPMS

TPMS for RTG and RMG Cranes

RTG and RMG cranes: up to 256 wheel positions per receiver, 0-1400 kPa, ±7 kPa, IP68, CAN 2.0B.

RTG and RMG cranes: up to 256 wheel positions per receiver, 0-1400 kPa, ±7 kPa, IP68, CAN 2.0B.

An RTG is a tall steel structure, so the radio path from the wheels to the cab is longer than on a truck.

The repeater count is decided from the axle drawing, not from a wheel count formula - that is the only way to get it right on a machine this size.

Typical layout is two receivers plus one to four repeaters.

We do not read the crane's own load or wind system - tyre pressure and temperature only.

What you get

  • 0-1400 kPa gauge (100-1500 kPa absolute), ±7 kPa
  • IP68 on sensor, receiver and repeater
  • Up to 256 wheel positions per receiver
  • 433.92 MHz, CAN 2.0B 250 kbps default, 500 ms period

All applications · TR-100R receiver specifications

FAQ

How many repeaters does an RTG need?
Typically one to four, decided from the axle drawing rather than from the wheel count.
Can one receiver cover all wheels?
One receiver addresses up to 256 wheel positions, but on a machine this size the cab-to-far-bogie path usually needs more than one receiver.
Is the sensor IP68?
Yes - sensor, receiver and repeater are IP68 on the 433.92 MHz line.

Tell us the application

Send the vehicle, wheel count and where the data must end up. We answer in writing.