Products / TPMS

TPMS for Reach Stackers

0-1400 kPa gauge (100-1500 kPa absolute), accuracy ±7 kPa, IP68 sensors and receiver, CAN 2.0B output at 250 kbps default with a 500 ms data period.

A reach stacker works in salt air and spends most of its day reversing. An external sensor on the valve stem is the first thing to be hit, so the sensor body is IP68 and the clamp is stainless. The receiver sits in the cab and needs one CAN tap, not a new harness.

Wheel positions are up to 256 per receiver. On a typical reach stacker that is one receiver with 8 to 12 sensors and no repeater, because the whole machine is within 30 metres of the cab.

One boundary worth stating: we do not read the crane's own load-moment system or its manufacturer CAN bus. We read tyre pressure and temperature only.

What you get

  • 0-1400 kPa gauge, ±7 kPa accuracy
  • IP68 sensor, receiver and repeater
  • CAN 2.0B, 250 kbps default, 500 ms period, 11-bit or 29-bit frames
  • 433.92 MHz radio, licence-free in most markets
  • Up to 256 wheel positions per receiver

TR-100R receiver specifications · Port machinery TPMS overview · Tell us the machine and the wheel layout

FAQ

Do we need a repeater on a reach stacker?
Normally no: one receiver in the cab covers the machine, because every wheel sits within about 30 metres of it.
Does the system read the crane's load moment indicator?
No. We read tyre pressure and temperature; the load-moment system stays with the crane manufacturer.
Which CAN frames does it output?
CAN 2.0B at 250 kbps by default, 500 ms period, in 11-bit or 29-bit frames depending on the configuration ordered.

Tell us the application

Send the vehicle, wheel count and where the data must end up. We answer in writing.