Products / TPMS

TPMS for Port AGVs

Port AGVs: 0-1400 kPa gauge, ±7 kPa, IP68, CAN 2.0B 250 kbps default, up to 256 wheel positions per receiver.

Port AGVs: 0-1400 kPa gauge, ±7 kPa, IP68, CAN 2.0B 250 kbps default, up to 256 wheel positions per receiver.

An AGV has no driver, so a tyre alarm has to reach the fleet controller rather than a cab display.

Our receiver puts pressure and temperature on CAN or serial, and the AGV controller decides what to do.

Raw 8-byte sensor packets can also be forwarded as-is, if the controller already decodes them.

We do not read the AGV's own navigation or fleet-management layer - we deliver pressure and temperature only.

What you get

  • 0-1400 kPa gauge (100-1500 kPa absolute), ±7 kPa
  • IP68 on sensor, receiver and repeater
  • Up to 256 wheel positions per receiver
  • 433.92 MHz, CAN 2.0B 250 kbps default, 500 ms period

All applications · TR-100R receiver specifications

FAQ

Can the receiver feed our fleet controller directly?
Yes - over CAN 2.0B (250 kbps default, 500 ms period, 11-bit or 29-bit frames) or RS232/RS485, one interface per unit.
Does it need a separate display?
No. The display is optional; on an AGV the data normally goes straight to the vehicle controller.
What is the supply voltage?
9-30V, so it runs from either a 12V or a 24V vehicle supply.

Tell us the application

Send the vehicle, wheel count and where the data must end up. We answer in writing.