Products / TPMS
TPMS for Multi-Axle Rigs
Multi-axle rigs: up to 256 wheel positions per receiver, 1-4 receivers on one machine, 0-1400 kPa, ±7 kPa, IP68.
Multi-axle rigs: up to 256 wheel positions per receiver, 1-4 receivers on one machine, 0-1400 kPa, ±7 kPa, IP68.
Above about thirty wheels a single receiver is no longer the right answer, because the radio has to reach wheels at both ends of the rig.
The receiver count and repeater layout are decided from the axle drawing.
One machine can run up to four receivers, each with its own wheel set.
The wheel position count is a capability limit, not a recommendation - the actual layout follows your axle drawing.
What you get
- 0-1400 kPa gauge (100-1500 kPa absolute), ±7 kPa
- IP68 on sensor, receiver and repeater
- Up to 256 wheel positions per receiver
- 433.92 MHz, CAN 2.0B 250 kbps default, 500 ms period
All applications · TR-100R receiver specifications
FAQ
- How many receivers does a 40-wheel rig need?
- Usually one, because a receiver addresses up to 256 positions; a second receiver is a radio-path decision, not a capacity one.
- Can I add receivers later?
- Yes - receivers are separate units on the same machine; the layout is an addressing plan, not a fixed build.
- Does it need repeaters?
- Only where steel blocks the path; the count comes from the axle drawing.
Tell us the application
Send the vehicle, wheel count and where the data must end up. We answer in writing.