Products / TPMS

TPMS for Empty Container Handlers

Empty container handlers: 9-30V supply, 0-1400 kPa gauge, ±7 kPa, IP68, CAN 2.0B or RS232, one interface per unit.

Empty container handlers: 9-30V supply, 0-1400 kPa gauge, ±7 kPa, IP68, CAN 2.0B or RS232, one interface per unit.

An empty container handler works in the same salt air and constant reversing as a reach stacker, with a shorter wheelbase.

The receiver runs from the vehicle supply and needs one CAN tap or one serial port, not a new harness.

Wheel positions are up to 256 per receiver, which is far more than this machine needs.

We do not read the machine's own load-moment or spreader system - tyre pressure and temperature only.

What you get

  • 0-1400 kPa gauge (100-1500 kPa absolute), ±7 kPa
  • IP68 on sensor, receiver and repeater
  • Up to 256 wheel positions per receiver
  • 433.92 MHz, CAN 2.0B 250 kbps default, 500 ms period

All applications · TR-100R receiver specifications

FAQ

What supply voltage does it need?
9-30V, so either a 12V or a 24V vehicle supply.
Can it output RS232 instead of CAN?
Yes - CAN 2.0B or RS232/RS485, one interface per unit, chosen at the factory.
Is the sensor IP68?
Yes, IP68 at the wheel.

Tell us the application

Send the vehicle, wheel count and where the data must end up. We answer in writing.